A bearing puller, used in extracting bearings, gears, or pulleys from shafts, generally comprises a forcing screw situated at the shaft’s end and legs encircling the rear of the bearing. While known as external bearing pullers, there are also internal variants, such as blind-bearing pullers. The exertion of force can be accomplished manually, hydraulically, or pneumatically. Specifically crafted claws enable the relatively effortless removal of even damaged, worn, or stubbornly lodged bearings by fitting around or within shaft components.
Why Do You Need a Bearing Puller?
If a part, such as a bearing, gear, or ball bearing, is so tight that you can’t loosen it with your hands, you need a tool that can do this task for you with minor strength. In this situation where the stuck component is installed on a machine, for instance, leading to a standstill, disassembly must be efficient and fast. Only with a puller, you can do this. A bearing puller is effective in productivity and long-term service life for machines. You should also keep in mind that necessary investment in new machines because of incorrect maintenance is higher as compared to investment in the right puller.
How Does 2 Leg Bearing Puller Work?
2 legs bearing pullers are used to remove bearings from housings or shafts. They are available as external pullers and internal pullers. When you use bearing puller 2 legs, you can easily remove bearings or other components. You need to tighten the forcing screw, and the bearing will be removed from the shaft through the pressure applied by the screw to the puller legs. You can easily buy these types of tools from Ajay Industries, which is one of the best hand tools manufacturers in India.
Uses of Bearing Puller 2 Leg
Basically, bearing pullers allow access where clearance is limited behind components. Its two legs are used for removing races, gears, sprockets, and bearings. There are 2 legs and three-leg bearing pullers available at Ajay Industries, which is the best bearing puller manufacturer and can be used with several automotive and industrial applications. They consist of drop-forged steel legs and have been heat-treated for durability and strength. For more torque or pressure, you can buy bearing puller 3 leg from Ajay Industries.
How to Use a Bearing Puller?
Here are steps to use a bearing puller:
- First and foremost, place the puller around the part, based on the part you want to remove.
- After that, adjust the legs of the puller to fit tightly around the part that is going to be extracted.
- At this point, you need to position the forcing screw by twisting it clockwise with your hands, until the screw starts touching the shaft. It is vital to adjust the legs until the middle of the screw is in the middle of the shaft.
- Turn the forcing screw carefully and slowly with either a spanner or a socket wrench while applying force onto the shaft. You need to turn the forcing screw until the bearing is removed.
- At last, you need to loosen the forcing screw by turning it anti-clockwise and extract the part from the legs of the puller.
Different types of bearing pullers are available at Ajay Industries to handle several bearing pulling tasks. Some bearings can be easily removed, whereas others are hard to remove. After considering several factors, choosing the right type of bearing puller for your job is not difficult. You can choose a bearing puller between bearing puller 2 legs and 3 legs bearing puller according to your task’s requirements. You can request a quote from Ajay Industries to know the price of each tool.
Conclusion
Now that you are aware of the basic functions and uses of 2 legs bearing puller. Make sure to choose the right type of puller to remove bearings easily. Moreover, you can also reach Ajay Industries to select a bearing puller or any type of hand tool, whether it be a combination plier or an automobile tool.
Other Useful Links:-
spannerss.wordpress.com 